image of Diamond Rib
image of Diamond Rib

Load Table

PDF - Download imperial load table
PS_RES_DiamondRib_Imp_200

Load Table

PDF - Download metric load table
PS_RES_DiamondRib_Met_200
Residential

Diamond Rib

Available in 30 Ga to 22 Ga, Agway’s extremely popular and versatile Diamond rib profile can be used as a roof or wall cladding for your residential project. Diamond Rib is available in multiple colours and two widths, further enhancing it’s versatility.

Measurement Type

Profile Picture

image of profile picture in imperial
  1. Steel conforms to ASTM A653.
  2. Section properties are in accordance with CSA-S136-07.
  3. Values in row “S” are based on strength.
  4. Values in row “D” are based on a deflection limit of 1/180 of the span.
  5. Web crippling not included in strength values. See example calculation in notes to designer.
  6. Contact the sales department for stocked colours and gauges.
  7. The load table contained on this data sheet was prepared by Dr. R.M. Schuster P.Eng. Professor Emeritus of Structural Engineering, University of Waterloo, Ontario, Canada.
image of profile picture in metric
  1. Steel conforms to ASTM A653.
  2. Section properties are in accordance with CSA-S136-07.
  3. Values in row “S” are based on strength.
  4. Values in row “D” are based on a deflection limit of 1/180 of the span.
  5. Web crippling not included in strength values. See example calculation in notes to designer.
  6. Contact the sales department for stocked colours and gauges.
  7. The load table contained on this data sheet was prepared by Dr. R.M. Schuster P.Eng. Professor Emeritus of Structural Engineering, University of Waterloo, Ontario, Canada.

Specifications

GAUGE LENGTH COVERAGE
MINIMUM MAXIMUM MINIMUM MAXIMUM
30 24 16 540 36
30 22 16 480 30
GAUGE LENGTH COVERAGE
MINIMUM MAXIMUM MINIMUM MAXIMUM
30 24 406 13.72 914
30 22 406 12.92 780

Section Properties

BASE STEEL
THICKNESS		 WEIGHT
G90		 YIELD
STRESS		 SECTION
MODULUS		 DEFLECTION MOMENT
OF INERTIA
in psf ksi MID SPAN
in3		 SUPPORT
in3		 MID SPAN
in4
0.0120 0.64 33 0.0221 0.0202 0.0144
0.0135 0.71 80 0.0227 0.0203 0.0152
0.0180 0.93 33 0.0381 0.0361 0.0227
0.0240 1.22 33 0.0550 0.0498 0.0302
0.0300 1.51 33 0.0683 0.0637 0.0376
BASE STEEL
THICKNESS		 MASS
Z275		 YIELD
STRESS		 SECTION
MODULUS		 DEFLECTION MOMENT
OF INERTIA
mm kg/m MPa MID SPAN
x103mm3		 SUPPORT
x103mm3		 MID SPAN
x103mm3
0.305 3.11 230 1.19 1.09 0.0196
0.343 3.46 550 1.22 1.09 0.0207
0.457 4.52 230 2.04 1.94 0.0309
0.610 5.94 230 2.96 2.68 0.0412
0.762 7.36 230 3.67 3.42 0.0514